LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Windstar V6-3.8L VIN 4 >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Control Assembly, HVAC >> Primary A/C-Heater System >> Climate Control Assembly Switch Knobs
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Climate Control Assembly Switch Knobs

REMOVAL
1. Grasp knob and pull it outward from control assembly bezel.

NOTE: Do not use a sharp instrument to pry the knob off the shaft as damage to the surface of the bezel is likely to occur.

INSTALLATION
1. To install, knob, align its keyed surface with mating surface on shaft. Press knob inward until its back edge is flush with surface of control assembly bezel.
scientia non olet · About LEMON Manuals