LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Econoline E350, Van Cargo Extended, 6.8 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Engine Controls - Remove/Install/Overhaul - 4.2L) >> Ignition System >> Distributor >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition System: Distributor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Ensure engine is at TDC of compression stroke. Rotate distributor rotor so reference marks nearly align. Insert distributor drive into engine.
  2. When installing distributor, rotor will rotate. Ensure reference marks are aligned when distributor is fully engaged in engine. To complete installation, reverse removal procedure. Set base ignition timing. See D-ADJUSTMENTS - GASOLINE article.