LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Econoline E350, Van Cargo Extended, 6.8 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Engine Controls - Remove/Install/Overhaul - 4.2L) >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

WARNING: This page is about a different variant/trim than selected.

Disconnect negative battery cable. Remove any component necessary to gain access to PCM. For PCM location, see PCM LOCATION table. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. On Pickup, removal of fender liner may be necessary to slide PCM out. To install, reverse removal procedure.

PCM LOCATION

Model Location
Pickup Right Side Of Engine Compartment
Van Near Master Cylinder
scientia non olet · About LEMON Manuals