Control Assembly, HVAC

Radio Removal Tool:

Special Service Tool(s) Required

Removal
1. Disconnect battery ground cable.
2. Insert Radio Removing Tool T87P-19061-A in retaining clip.
3. Apply a side load away from the control to disengage clips.
4. Pull the A/C control from the instrument panel opening and disconnect the wire connectors from the control assembly.
5. Disconnect the vacuum harness.







Installation
1. Connect the wire connectors and the vacuum harness.
2. Position the A/C control in the instrument panel opening. Engage it in the track in the instrument panel and push it in until it latches firmly in place.
3. Connect the battery ground cable.
4. Check the system for proper operation.