Climate Control Assembly

Radio Removal Tool:

Special Service Tool(s) Required







Removal
1. Disconnect battery ground cable.
2. Insert Radio Removing Tool T87P-19061-A in retaining clip access holes.
3. Apply a side load away from the control to disengage clips.
4. Pull the manual A/C control assembly from the instrument panel opening and disconnect the wire connectors from the control assembly.
5. Disconnect the vacuum harness.

Installation
1. Connect the wire connectors and the vacuum harness to the control assembly.
2. Position the A/C control in the instrument panel opening. Engage it in the track in the instrument panel and push in until it latches firmly in place.
3. Connect battery ground cable.
4. Check the system for proper operation.