LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Explorer 2D Utility, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Controls - System/Component Tests - EEC-IV (5.8L)) >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Power Circuits
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Circuits

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.

Using a voltmeter, check for battery voltage between PCM terminal No. 1 (KAPWR) and ground. Also check for battery voltage at terminals No. 37 and 57 (VPWR). If battery voltage is not present, power is not being supplied from EEC power relay. See CIRCUIT TEST B in TESTS W/CODES - EEC-IV (5.8L) article.

PCM LOCATION

Application Location
Bronco & Pickup Behind Left Kick Panel
RWD Van Under Right Side Of Instrument Panel, Below Heater Blower Motor
Fig 1: Identifying PCM 60-Pin Connector Terminals (5.8L)
G90I09354