October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Single Switch
- With switch removed from vehicle, test switch with self-powered test light or ohmmeter. With switch in NEUTRAL position, continuity should exist between terminals No. 1 and 2 and between terminals No. 3 and 4. There should be no continuity between terminal No. 5 and all other terminals. See Fig 1
.
- With switch in UP position, continuity should exist between terminals No. 1 and 5 and between terminals No. 3 and 4. There should be no continuity between terminal No. 2 and all other terminals.
- With switch in DOWN position, continuity should exist between terminals No. 1 and 2 and between terminals No. 4 and 5. There should be no continuity between terminal No. 3 and all other terminals.
- If continuity is not as specified, replace faulty power window switch and retest system.
Courtesy of FORD MOTOR CO.