October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Line Pressure Test
- Connect a 0-300 psi (0-21.1 kg/cm2
) pressure gauge to line pressure port tap on left side of transmission case forward of control lever. See Figure
. Gauge hose must be long enough to read gauge while operating engine.
- With engine at normal operating temperature, apply parking and service brakes. Check line pressure at idle and WOT stall in all ranges. See CONTROL PRESSURE SPECIFICATIONS
. If pressure is not as specified, perform EPC PRESSURE CHECK
.