Pinpoint Test N - Speed Control Indicator Is Always On
WARNING: This page is about a different car, the 1995 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- Unplug connector from cruise control servo. Turn ignition on. Wait until prove-out is completed. Observe indicator. If indicator stays on, go to next step. If indicator goes off, replace cruise control servo.
- Unplug instrument cluster connector C2. See Figure . If indicator stays on, temporarily substitute known good EIC, then retest system. If indicator goes off, repair Orange/Light Blue wire between speed control servo and instrument cluster connector C2 pin No. 26.