LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Escort Base, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Starter No-Load Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Starter No-Load Test

  1. Connect starting system test equipment following manufacturer instructions. See Fig 1 . Ensure carbon pile rheostat of starter tester is turned off.
  2. Connect heavy wire between negative battery terminal and starter frame. Connect another heavy wire between positive battery terminal and positive terminal of starter solenoid.
    CAUTION: Ensure starter is securely mounted in vise while energizing as starter will move or jump.
  3. Connect a jumper wire between battery positive terminal and "S" terminal on starter solenoid. See Figure . Ensure starter drive ejects completely and starter spins rapidly. Observe ammeter reading. Replace starter if current draw is more than specified. See STARTER SPECIFICATIONS  .
Fig 1: Identifying Starter No-Load Test Connections (Typical)
G90A08157Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals