October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Check

Turn ignition off. Disconnect ABS control unit. See COMPONENT LOCATIONS . Ensure hydraulic actuator assembly is connected. Set DVOM on 200-ohm scale. Measure resistance between Red/Yellow wire at ABS control unit connector and ground. If resistance is less than one ohm, go to PINPOINT TEST WL-1 . If resistance is more than one ohm, repair Red/Yellow wire between ABS control unit and hydraulic actuator assembly.