October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ABS Warning Light Diode Check

Disconnect ABS control unit. See COMPONENT LOCATIONS . Turn ignition on. Using jumper wire, connect Black/Blue wire at ABS control unit connector to ground. Observe ABS warning. Light should NOT turn on when Black/Blue wire is grounded. If ABS warning light turns on, go to PINPOINT TEST FSR-6 . If ABS warning light does not turn on, go to PINPOINT TEST FSR-5 .