LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Bronco 5.8 H >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - System/Component Tests - Gasoline) >> Fuel System >> Fuel System Pressure Release
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel System Pressure Release

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1993 Ford Ranger, 1993 Ford RV Cutaway, 1993 Ford Pickup, 1993 Ford F-Super Duty, and 1993 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel tank cap. Using Fuel Pressure Gauge (T80L-9974-B), release pressure from system at pressure relief valve (Schrader valve), located on fuel injection manifold rail.
  2. If fuel pressure gauge is not available, disconnect electrical connector to inertia switch located on left side of luggage compartment. Remove fuel cap to release fuel tank pressure. Crank engine for 15 seconds to release system pressure.