Air Bag Control Module: Service and Repair

WARNING: The backup power supply energy must be depleted before any air bag component service is performed. To deplete the backup power supply energy, disconnect the battery ground cable and wait one minute.

NOTE: The air bag diagnostic monitor has a blue casing and is located behind the audio system and shift console panel.





1. Disconnect the battery ground cable and wait one minute for the backup power supply energy to be depleted.
2. Remove the shift console panel.

Diagnostic Monitor:

3. Disconnect the two air bag diagnostic monitor electrical connectors.
4. Remove the three air bag diagnostic monitor nuts.
5. Slide the air bag diagnostic monitor out of the mounting bracket.
6. To install, reverse the removal procedure.
7. Verify that the air bag warning indicator is operative.