LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe GT, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Tests with Codes- 2.5L >> Self-Diagnostic System Description >> Clearing Codes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Clearing Codes

CAUTION: When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section.

To clear trouble codes, deactivate self-test by disconnecting jumper wire from PCM STI terminal at Data Link Connector (DLC). Disconnect negative (-) battery cable. Depress brake pedal for 5-10 seconds. All hard codes and intermittent codes will be erased from PCM memory.

scientia non olet · About LEMON Manuals