LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Riding Height Adjustment >> Mark VII >> Adjusting Riding Height
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Adjusting Riding Height

  1. Adjust front riding height by moving front left and/or right lower sensor attaching stud. Three adjustment positions are provided on bracket. Loosen attaching bolt, and adjust as necessary. A one position change to sensor attachment point will result in 1/2" (12.7 mm) change, up or down. See Fig 1.
  2. Rear suspension riding height is adjusted by moving rear sensor attaching bracket up or down relative to right rear arm (slot adjustment is provided on bracket).
  3. Loosen attaching nut, and adjust up or down as required. One index mark change to sensor attachment point will result in 1/4" (6.4 mm) change, up or down. See Fig 2.
Fig 1: Adjusting Front Riding Height (Mark VII)
G56537Courtesy of FORD MOTOR CO.
Fig 2: Adjusting Rear Riding Height (Mark VII)
G56538Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals