LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System >> Pinpoint Tests >> Pinpoint Test MMR-8 >> Motor Operation Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Motor Operation Check

Ensure hydraulic actuation assembly is disconnected. Verify motor terminal receiving Red/Yellow wire from 2-pin connector. Apply 12 volts to Red/Yellow terminal on motor. Using jumper wire, momentarily ground remaining motor terminal (Black wire). If motor operates, go to PINPOINT TEST MMR-9  . If motor does not operate, replace hydraulic actuation assembly.

scientia non olet · About LEMON Manuals