Clutch Switch: Service and Repair

Clutch Pedal Position Switch:

REMOVAL

1. Disconnect the Clutch Pedal Position (CPP) switch electrical connector.

2. Loosen the clutch pedal position switch locknut.

3. Unscrew the CPP switch from the support bracket.

INSTALLATION

1. Screw the CPP switch to the support bracket.

2. Tighten the CPP switch locknut to 14-18 Nm (10-13 lb ft).

3. Connect the CPP switch electrical connector.

4. Adjust the clutch pedal height adjustment. Adjustments