LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Crown Victoria Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnostic Tests Using Warning Light Symptom Sequence Chart >> Pinpoint Test F - Brake Light On
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pinpoint Test F - Brake Light On

  1. Ensure brake fluid level is okay. If brake fluid level is low, check for external leak and repair if necessary. If brake fluid level is okay, go to next step.
  2. Unplug 3-pin connector from master cylinder reservoir cap. Check for continuity between pins No. 1 and No. 3. See Figure . If no continuity exists, go to step 3). If continuity exists, replace master cylinder reservoir cap.
  3. Check continuity between pin No. 2 of reservoir cap vehicle harness connector and ground. If continuity exists, repair circuit No. 977 (Pink/White wire). If no continuity exists, verify BRAKE light is still on.
scientia non olet · About LEMON Manuals