LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe LX, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test C5 >> Circuit Continuity Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit Continuity Check

Ensure ignition is off. Disconnect steering angle sensor connector and VAPS control module connector. Set VOM on 200-ohm scale. Connect VOM to steering angle sensor connector and VAPS control module connector to measure resistance for Green wire between connectors. Measure resistance for Green/White wire between connectors. Measure resistance for Green/Yellow wire between connectors. If resistances are less than 5 ohms, proceed to PINPOINT TEST C6  . If resistances are NOT as specified, repair specific wire as necessary.

scientia non olet · About LEMON Manuals