LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe LX, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Crankshaft Sensor >> Installation (3.0L SHO)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation (3.0L SHO)

  1. Route sensor wiring harness through belt cover. Install sensor assembly on mounting pad, and loosely install retaining screws. DO NOT tighten screws yet.
  2. Set clearance between crankshaft sensor and vane on crankshaft pulley to .03" (.8 mm). Tighten screws to 22-31 INCH lbs. (2.5-3.5 N.m). Install lower timing belt cover. Install crankshaft pulley, and tighten bolt to 112-127 ft. lbs. (152-172 N.m). To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals