September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Retractor Hinge
- Extend the headlamps and set the rotary switch in the third detent position.
- Disconnect the motor link assembly from the retractor hinge. See Fig 1.
- Lower the retractor hinge until the hinge is stopped by the rubber stopper. See Fig 2.
- Adjust the rubber stopper so that the headlamp lid is flush with the fender and the hood. See Fig 3.
Courtesy of FORD MOTOR CO.
Courtesy of FORD MOTOR CO.
Courtesy of FORD MOTOR CO.