LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe GL, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel Line Connector >> Installation (Spring Lock Coupling)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation (Spring Lock Coupling)

  1. Ensure garter spring in cage of male fitting is not damaged. Replace if necessary. Clean all dirt from both pieces of coupling. Check "O" rings for damage, and replace using proper fuel resistant "O" rings (if necessary).
  2. Lubricate "O" rings and inside of female fitting with clean engine oil. Snap fitting together. Install retaining clip onto coupling. Ensure horseshoe portion of clip is over coupling. DO NOT install retaining clip over rubber fuel line. See Fig 1 .
Fig 1: Installing Fuel Line Spring Lock Coupling
G106116Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals