October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Pinpoint Test C3 - Steering Angle Sensor Check
- Disconnect steering angle sensor connector. Set steering wheel straight. Set VOM on 200K/ohm scale. Measure resistance between Green and Green/White wires while turning steering wheel slowly from straight to 180 degrees right. If resistance increases from 25K ohms to approximately 50K ohms, proceed to PINPOINT TEST C4
. If resistance is NOT within specification, replace steering angle sensor.
- With steering wheel straight, measure resistance between Green and Green/White wires. If resistance is between 20-30K ohms, proceed to PINPOINT TEST C4
. If resistance is NOT within specification, replace steering angle sensor.