LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Probe LX, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/O Codes >> Intermittent Test Procedures >> KOEO Wiggle Test Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

KOEO Wiggle Test Procedure

Connect test equipment. Turn ignition on and activate self-test with jumper lead or diagnostic tester. Wait 10 seconds, deactivate and then reactivate self-test. Wiggle test mode has been achieved. Tap, move and wiggle the suspected sensor and/or harness area. If a fault is detected, a code may be stored in memory and indicated at the diagnostic tester or Scan tool. Record code and perform CIRCUIT TEST indicated in CONTINUOUS MEMORY CODES chart. See TESTS W/CODES article.

scientia non olet · About LEMON Manuals