October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Throttle Position Sensor (TPS) - All Models
- Disconnect TPS from wiring harness. Scribe marks on throttle body and TPS for reassembly reference. Remove mounting screws and TPS. Slide rotary tangs of TPS into position over throttle shaft blade with wires pointing down. Rotate TPS clockwise to installed position.
- Failure to install TPS in this manner may result in excessive idle speeds. Align scribe marks on throttle body and TPS. Secure TPS to throttle assembly with retaining screws. Reconnect wiring.