October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Retrieving Codes

Service codes are retrieved from the EEC-IV system through the Self-Test connector. Various methods and test equipment may be used to access these codes. The following test equipment may be used:

Analog Volt/Ohmmeter
Scan Tool
STAR Series Tester
In-Dash CHECK ENGINE or SERVICE ENGINE SOON Light

SELF-TEST CONNECTOR LOCATIONS

Application	Location
Probe (3.0L)	Left rear of engine compartment
Sable & Taurus	Right rear of engine, below MAP sensor