Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Floor Opening Cover Plate | 6-10 (8-14) | |
| Intermediate Shaft Flex Coupling toSteering Gear Bolt | 24-34 (33-46) | |
| Intermediate Shaft-to-Steering Column Nut | 24-34 (34-46) | |
| Pedal Support Bracket Bolts | 19-27 (26-37) | |
| Steering Column | ||
| Cover Plate Clamp Bolt | 8-18 (11-24) | |
| Support Bracket Nuts | 13-38 (18-51) | |
| Steering Wheel-to-Steering Shaft Nut | 30-42 (41-57) | |
| INCH Lbs. (N.m) | ||
| Bearing Retainer | ||
| Lower | 12-20 (1.4-2.3) | |
| Upper | 12-20 (1.4-2.3) | |
| Column Cover (Tilt) | 40-50 (4.5-5.6) | |
| Flange Retainer Allen Screw (Tilt) | 50-68 (5.6-7.7) | |
| Flange to Outer Tube | 60-75 (6.8-8.5) | |
| Ignition Switch Retaining Nut | 40-65 (4.5-7.3) | |
| Lock Actuator Insert | 15-25 (1.7-2.8) | |
| Selector Indicator Cable Bracket Screw | 20 (2.3) | |
| Shift Tube Retaining Nut | 35-50 (4.0-5.6) | |
| Steering Column Flange Extension Screws | ||
| Non-Tilt | 15-22 (1.7-2.5) | |
| Tilt | 10-20 (1.1-2.3) | |
| Steering Column Shroud Screw | 10-15 (1.1-1.7) | |
| Steering Wheel Horn Cover Screws | 7-11 (.8-1.2) | |
| Turn Signal Lever Screw | 30-45 (3.4-5.1) | |
| Turn Signal Switch Screws | ||
| Non-Tilt | 15-25 (1.7-2.8) | |
| Tilt | 20-30 (2.3-3.4) | |
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Lower Bearing Retainer Clamp Nut | 9-18 (12-24) | |
| Steering Column Coupling Flange Nuts | 14-21 (19-28) | |
| Floor Opening Plate-to-Dash Panel Bolts | 12-18 (16-24) | |
| Opening Cover Clamp Bolt | 12-18 (16-24) | |
| Support Bracket Bolts | 19-27 (26-37) | |
| Steering Wheel-to-Steering Shaft Nut | 30-42 (41-57) | |
| INCH Lbs. (N.m) | ||
| Bearing Retainer | ||
| Lower | 12-20 (1.4-2.3) | |
| Column Cover (Tilt) | 40-50 (4.5-5.6) | |
| Flange Retainer Allen Screw (Tilt) | 50-68 (5.6-7.7) | |
| Flange to Outer Tube | 60-75 (6.8-8.5) | |
| Ignition Switch Retaining Nut | 40-65 (4.5-7.3) | |
| Lock Actuator Insert | 15-25 (1.7-2.8) | |
| Shift Tube Retaining Nut | 35-50 (4.0-5.6) | |
| Steering Column Flange Extension Screws | ||
| Non-Tilt | 15-22 (1.7-2.5) | |
| Tilt | 10-20 (1.1-2.3) | |
| Steering Wheel Horn Cover Screws | 7-11 (.8-1.2) | |
| Turn Signal Lever Screw | 30-45 (3.4-5.1) | |
| Turn Signal Switch Screws | ||
| Non-Tilt | 15-25 (1.7-2.8) | |
| Tilt | 20-30 (2.3-3.4) | |