LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1989 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Motor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Windows: Testing: Motor

  1. Remove door trim panel. Disconnect motor connection. Disconnect regulator mechanism from motor. Connect power source (battery) to motor with an ammeter in series. Operate motor and observe current draw.
  2. Current draw should not fluctuate or exceed 4 amps. Reverse motor wire connections to observe reversed motor operation. Replace motor if current draw exceeds 4 amps.
scientia non olet · About LEMON Manuals