Alignment Specifications
WARNING: This page is about a different car, the 1988 Lincoln Mark VII. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Camber in Degrees | ||||
| Fraction | 0 +/- 3/4 | |||
| Decimal | 0 +/- 0.75 | |||
| Caster in Degrees | ||||
| Fraction | 1 1/2 +/- 1 | |||
| Decimal | 1.5 +/- 1 | |||
| Toe-In in Inches | ||||
| Fraction | 1/8 +/- 1/8 | |||
| Decimal | 0.125 +/- 0.125 | |||
| Toe-In in Degrees | ||||
| Fraction | 1/4 +/- 1/4 | |||
| Decimal | 0.250 +/- 0.250 | |||
| Toe-Out on Turns | ||||
| Inner | 20° | |||
| Outer | 17.14° | |||
| Steering Axis Inclination (SAI) | (1) | |||
|
||||