October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Clearing Continuous Memory Codes
- Perform KEY ON/ENGINE OFF SELF-TEST. When the first service code appears, exit SELF-TEST program by disconnecting STAR tester or by removing jumper wire from Self-Test Input (STI) pigtail. Exiting QUICK TEST in this manner will clear all codes stored in continuous memory.
- Repeat KEY ON/ENGINE OFF SELF-TEST. If code output is 11-10-11, go to CONTINUOUS MEMORY CODES TO BE TESTED. If code output is not correct, check Self-Test Input (STI) circuit for short to ground. Repair short and repeat CLEARING CONTINUOUS MEMORY CODES step.