LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1986 >> Cutaway 6.9 1 >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - 6.9L Diesel >> Adjustments >> Injection Pump Timing >> Static Timing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Static Timing

  1. Remove fast idle bracket and solenoid from injection pump. Loosen 3 nuts attaching fuel injection pump to pump mounting adapter with Injection Pump Wrench (T83T-9000-B).
  2. Install Injection Pump Rotator (T83T-9000-C) on front of pump. Rotate pump to align injection pump mounting flange timing mark with pump mounting adapter timing mark. See Fig 1 .
  3. Remove rotator and tighten mounting nuts. Visually check timing to ensure that marks are still aligned after tightening nuts. Install fast idle bracket and solenoid.
Fig 1: Static Timing Mark Alignment Keep mounting nuts snug during static timing check.
G8720
scientia non olet · About LEMON Manuals