September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Reminder Light Reset Procedure
- Turn ignition off. Insert Phillips screwdriver into hole in timer unit. While pressing screwdriver in, turn ignition switch to "RUN" position.
- Light should be on. Hold screwdriver in for 5 seconds. Remove screwdriver. Light should go out in 2-10 seconds. If not repeat steps 1) and 2).
- Turn ignition off. Turn ignition switch to "RUN" position. Light should come on for 2-10 seconds. This checks proper reset of light module.