Repair and Diagnosis: Transmission: Clutches: Description
Hydraulic clutch control consists of hydraulic master cylinder, slave cylinder, reservoir and connecting linkages. Clutch disc and pressure plate are single disc type. Clutch release bearing or bearing arm is activated by hydraulic pressure. Pilot bearing (roller needle type) is mounted in flywheel and requires no lubrication unless clutch assembly is serviced. No adjustment of clutch linkage or pedal position is required.
CAUTION:
Disconnect master cylinder push rod if slave cylinder is to be disconnected from release lever or bearing. Permanent damage to slave cylinder will occur if master cylinder is activated with slave cylinder disconnected.