LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2020 >> 500L Urbana >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Electronic Control Modules (Service Information)) >> Module, Steering Column Control (SCCM) >> Removal And Installation >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Fiat 124 Spider. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure that the SCCM is not damaged.
  2. Connect the SCCM wire harness connectors at the rear of the SCCM.
    GC0180630Courtesy of CHRYSLER GROUP, LLC
  3. Position the SCCM (2) onto the steering column (3).
  4. Install new fasteners (1) and tighten securely.
  5. Install the clockspring. Refer to CLOCKSPRING, REMOVAL AND INSTALLATION .
  6. Install the windshield wiper stalk switch. Refer to SWITCH, MULTIFUNCTION, RIGHT, REMOVAL AND INSTALLATION .
  7. Install the exterior lights multifunction switch. Refer to SWITCH, MULTIFUNCTION, REMOVAL AND INSTALLATION .
  8. Install the steering column upper and lower shrouds. Refer to SHROUD, STEERING COLUMN, LOWER, REMOVAL AND INSTALLATIONSHROUD, STEERING COLUMN, UPPER, REMOVAL AND INSTALLATION .
  9. Install the steering wheel. Refer to WHEEL, STEERING, REMOVAL AND INSTALLATION .
  10. Connect the negative battery cable.
  11. Connect the diagnosis equipment and check that there are no errors in the system.
scientia non olet · About LEMON Manuals