Module, Radio Receiver: Installation
WARNING: This page is about a different car, the 2017 Fiat 500L. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the antenna connectors (2).
- Connect the radio electrical connector (1).
- Insert the radio (3) into the instrument panel.
- Install and securely tighten the four mounting fasteners (1a).
- Install the switch pod. Refer to POD, SWITCH, INSTALLATION .
- Connect the negative battery cable.
NOTE:
The radio must be programmed after a radio replacement. Refer to MODULE, RADIO RECEIVER, MODULE PROGRAMMING .