LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2018 >> 500L Pop >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control >> Evaporative Emissions >> Sensor, Crankcase Pressure >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Crankcase Pressure: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine cover (Refer to ENGINE/COVER, ENGINE/REMOVAL AND INSTALLATION ).
    GC0184229Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the crankcase pressure sensor wire harness connector (1).
  4. Loosen the clamp and disconnect the oil vapor intake hose (2).
  5. Open the clip and remove the crankcase pressure sensor.
scientia non olet · About LEMON Manuals