LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2017 >> 500 Pop, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Aw60T Automatic Transmission (Service Information) - 500 >> Cable, Shift >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cable, Shift: Installation

NOTE:

Make sure the rubber grommet in the floor pan is fully seated to prevent water leaking into the passenger compartment.

GC0153084Courtesy of CHRYSLER GROUP, LLC
  1. Install the shifter cable to the vehicle.
  2. Install the shifter cable (2) to the retaining clip (1).
    GC0152805Courtesy of CHRYSLER GROUP, LLC
  3. Push the shifter cable grommet (1) through the floor from beneath the vehicle.
  4. Lower the vehicle.
  5. Seat the rubber grommet into the floor pan. Ensure that the grommet is fully engaged to the floor pan.
  6. Install the shifter. Refer to INSTALLATION  .
    GC0153005Courtesy of CHRYSLER GROUP, LLC
  7. Install the shift cable (1) to the bracket (2). Make sure the lock tab (3) on the shift cable is fully seated.
  8. Connect the shift cable (1) to the transaxle manual valve lever.
  9. Install the battery tray. Refer to INSTALLATION .
  10. Adjust the shifter cable. Refer to ADJUSTMENTS  .
scientia non olet · About LEMON Manuals