LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2012 >> 500 L4-1.4L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Control Module HVAC >> Service and Repair >> Blower Motor Power Module - Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Blower Motor Power Module - Installation





INSTALLATION





1. Install the blower motor power module (4) to the right side of the HVAC housing (2) and install the two retaining screws (1 and 3). Tighten the screws to 0.8 Nm (7 in. lbs.).
2. Connect the three wire harness connectors (5) to the blower motor power module.
3. Install the recirculation door actuator Recirculation Door Actuator - Installation.





4. Position the passenger side console closeout cover (1) and engage the front retaining tab.
5. Carefully engage the console closeout cover rear retaining clips and install the screw (2). Tighten the screw securely.
6. Install the passenger side silencer panel Silencer Panel - Installation.
7. Reconnect the negative battery cable.

scientia non olet · About LEMON Manuals