Intermittent Malfunction

This procedure applies if you have been sent here from Diagnostic Trouble Code (DTC) test and have just attempted to simulate the condition that initially set the DTC. The following additional checks may assist in identifying a possible intermittent problem:

• Consult customer on nature of the problem and condition at which the problem exists.
• Visually inspect related wiring harness connectors for broken, bent, pushed out or corroded terminals.
• Visually inspect related wiring harness for chafed, pierced or partially broken wires.
• Move wiring harness and connector in several directions to attempt to find defective condition in wiring or connector.