LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1997 >> Talon Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Non-Turbo >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Using Scan Tool

  1. Ensure battery is fully charged. Turn ignition off. Connect scan tool to Data Link Connector (DLC). Two connections required. One at 12-pin DLC, and another at 16-pin DLC. See DATA LINK CONNECTOR (DLC) table for connector location. See 1.
    DATA LINK CONNECTOR (DLC) LOCATION

    Application DLC Location
    Talon Non-Turbo Base Of Steering Column
    Fig 1: Data Link Connectors (DLCs) Location
    G95D12677Courtesy of CHRYSLER CORP.
  2. Turn ignition on. Using scan tool manufacturer's instructions, record all DTCs displayed on scan tool. Using all DTCs obtained, proceed to SELF-DIAGNOSTIC TESTS . Once all repairs are made, ensure DTCs are cleared from PCM. See CLEARING DIAGNOSTIC TROUBLE CODES.
scientia non olet · About LEMON Manuals