LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Talon Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (A/C-Heater System - Automatic) >> Testing >> Identifying Vehicle Equipment & System Problems
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Identifying Vehicle Equipment & System Problems

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Connect DRB to Data Link Connector (DLC). See Figure. Turn ignition on. If DRB screen is blank, see REPAIRING DRB BLANK SCREEN.
  2. With DRB, select BODY under SELECT SYSTEM and then BODY COMPUTER. If DRB does not display BUS OPERATIONAL message, check body control computer for bus failure messages. See the TESTS W/CODES article in the ENGINE PERFORMANCE section. If BUS OPERATIONAL message is displayed, go to next step.
  3. Select body controller. Select ATC system. If DRB displays NO RESPONSE, go to TEST 113A: BATTERY POWER TO MODULE DISCONNECTED. If NO RESPONSE is not displayed, go to TEST 2A: AUTOMATIC TEMPERATURE CONTROL.
NOTE: See TEST 2A and TEST 113A in TROUBLE SHOOTING.
scientia non olet · About LEMON Manuals