LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Summit ES, 1.8 C >> Repair and Diagnosis >> Engine Performance >> Sensor Range Charts >> Engine Controls - Sensor Operating Range Charts - 1.8L 4-CYL >> Sensor Operating Range Charts >> Throttle Position (TP) Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Throttle Position (TP) Sensor

Measure total and variable resistance between specified TP sensor connector terminals. See Fig 1 . See TP SENSOR TEST TERMINALS  table. Total resistance should be 3500-6500 ohms. Variable resistance should change smoothly between 3500 and 6500 ohms as throttle valve is moved from closed to wide open throttle.

TP SENSOR TEST TERMINALS

Application Terminals No.
Total Resistance 1 & 4
Variable Resistance
Summit Wagon 1 & 3
All Other Models 2 & 4
Fig 1: Identifying TP Sensor Terminals (All Models)
G95A31534Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
VEHICLE SPEED SENSOR CONTINUITY TEST (1)

Application (2) Continuity
All Models 4 Changes Per Revolution
(1) Measure continuity at back of speedometer. See appropriate wiring diagram in WIRING DIAGRAMS  section.
(2) With PCM connector disconnected, turn speedometer cable to cycle reed switch on and off.
VEHICLE SPEED SENSOR VOLTAGE TEST (1)

Application (2) Volts
Ignition Switch Off 1 Or Less
Ignition Switch On 4.5-4.9
(1) Measure voltage at back of speedometer. See appropriate wiring diagram in WIRING DIAGRAMS  section.
(2) With PCM connector disconnected, turn speedometer cable to cycle reed switch on and off.
VOLUME AIRFLOW HERTZ TEST (1)

Application Hz @ 700 RPM Hz @ 2500 RPM
Mirage 23-49 (2) 51-91
Summit Wagon 23-49 (2) 51-91
(1) Measure Hertz frequency using a scan tool.
(2) At 2000 RPM.
scientia non olet · About LEMON Manuals