LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Summit Base >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel >> Testing >> Reed Switch >> Continuity Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Continuity Check

  1. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Check continuity between reed switch terminals No. 1 and 2. See Fig 1 .
  2. Ensure continuity pulses on and off 4 times per revolution of speedometer shaft connection. If continuity is not as specified, replace reed switch.
Fig 1: Reed Switch Test Terminals
G93B82397Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals