LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1994 >> Vision ESi, 3.3 T >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Body Control Computer >> Diagnostic Procedure >> Entering On-Board Diagnostics >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Entering On-Board Diagnostics: Notes

  1. Before entering on-board diagnostics, refer to PRETEST INSPECTION  . Turn ignition off. Attach appropriate 1994 cartridge to DRB. Connect DRB to data link connector. See Figure .
  2. Turn all accessories off. Turn ignition on. All character positions will glow and copyright information will appear on DRB screen for a few seconds. Display will then change to DRB menu.
  3. If DRB displays an error message or if screen is blank, refer to VEHICLE COMMUNICATIONS (ALWAYS start at TEST 1A). Testing of NO RESPONSE messages may be found in appropriate BODY CONTROL MODULE TESTS.
  4. The following DRB modes can be accessed from DRB menu: VEHICLES TESTED, HOW TO USE, CONFIGURE and SELECT SYSTEM.
scientia non olet · About LEMON Manuals