LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1993 >> Vision V6-201 3.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Description and Operation >> Modes of Operation >> Open Loop >> Engine Warm Up
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Engine Warm Up



This is an OPEN LOOP mode.

During engine warm-up, the PCM receives input from:

- Battery voltage

- Crankshaft position (CKP) sensor

- Engine coolant temperature (ECT) sensor

- Intake air temperature (IAT) sensor

- Manifold absolute pressure (MAP) sensor

- Throttle position sensor (TPS)

- Camshaft position (CMP) sensor

- A/C select switch

Based on these inputs the PCM will:

- Apply voltage to the injectors. The PCM then controls injection sequence and pulse width by switching individual injector ground paths on and off.

- Adjust engine idle speed through the IAC motor.

- Adjust ignition timing.

- Begin to monitor oxygen sensor. When engine is at operating temperature, the system will leave warm up mode and go into closed loop operation.

scientia non olet · About LEMON Manuals