LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1993 >> Vision TSi >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Injectors (TBI) >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Injectors (TBI): Installation

  1. Install a new "O" ring on injector cap. Injector will have "O" rings already installed. Apply a light coating of clean engine oil on "O" rings.
  2. Place injector into throttle body assembly. Align injector wiring terminals with injector cap fastener hole. See Fig 1 . Install injector cap with locating notch aligned with locating lobe on injector.
  3. Push down on injector cap to ensure a good seal. Rotate injector cap and injector to align attachment hole. Install Torx screw. To complete installation, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS.
Fig 1: Installing Fuel Injector (2.2L TBI & 2.5L TBI)
G90J13317Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals