September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Line Pressure Check (Except Ram-50)
- Set parking brake. Place shift lever in Neutral position. Attach engine tachometer. Remove line pressure port plug located above front transaxle shaft, forward of governor pressure port plug. Using appropriate adapter, attach pressure gauge.
- Start engine, and bring to operating temperature. With gear selector in Drive position, bring engine speed to 2500 RPM. Pull throttle control cable (if equipped) wide open at transaxle side.
- Line pressure should be 98-100 psi (6.9-7.0 kg/cm2
) on Colt, Colt 200, Colt Vista, and Summit, or 124-127 psi (8.7-8.9 kg/cm2
) on all others. If line pressure is not to specification, proceed to LINE PRESSURE ADJUSTMENT (EXCEPT RAM-50)
.