LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1992 >> Premier ES >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Solenoid Tests >> Pull-In Coil Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pull-In Coil Test

  1. Disconnect field coil wire from terminal "M" at starter solenoid. See Fig 1 . Connect jumper wire between positive battery terminal and terminal "S" of solenoid.
  2. Connect a second jumper wire from negative battery terminal and touch terminal "M" of starter solenoid. See Fig 1 . If solenoid plunger moves inward, solenoid is good. If solenoid plunger does not move inward, replace solenoid.
Fig 1: Identifying Starter Solenoid Terminals
G90A08770Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals