October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
"G" Force Sensor
- Test "G" force sensor. See "G" FORCE SENSOR TEST
under DIAGNOSIS & TESTING. If sensor is okay, go to next step. If sensor is faulty, replace sensor. See "G" FORCE SENSOR
under REMOVAL & INSTALLATION.
- Disconnect ECU wiring harness connector. Turn ignition switch to ON position. Using a DVOM, measure voltage between ECU connector terminal No. 6 (Blue/Black wire) and ground. See Figure
. If battery voltage does not exist, repair or replace wiring harness between "G" force sensor and ECU. If battery voltage exists, "G" force sensor circuit is okay. Replace faulty ECU.